Gasket for number plate light

This topic has 4 replies, 3 voices, and was last updated 4 years, 7 months ago by Norman Anderson.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
18th April 2020 at 2:04 pm #26476
Norman Anderson
Participant
Traction experts. Please forgive me if this appears lazy, but I have scoured the Internet without success. This is for a ‘53 Slough Traction. Any ideas as to where I can get one? Thank you in advance
19th April 2020 at 9:17 am #26479
David Faulkner
Participant
Part number is 706572 Norman and listed at Fransens https://tinyurl.com/y9tu3syp Pat2d and Der Franzose and part D54 on TOC spares list (ignore the LHD bit it’s the same part).
19th April 2020 at 9:26 am #26480
Bernie
Participant
The only difference between the LHD & RHD big boot No. Plate lamp was that the shell of the Slough lamp was chrome plated whereas the French ones were painted body colour.

B……
19th April 2020 at 10:19 am #26482
David Faulkner
Participant
Have you got the perspex part for the bottom Norman?

Mine was cracked and brittle so I bought a cheap picture frame from Wilko that had perspex rather than glass in it and used that to make a new one
20th April 2020 at 9:03 am #26485
Norman Anderson
Participant
Hi David, thanks for that. I never would have found it! Yes, the Perspex was completely shot. I had a few bits of Perspex knocking around. I also managed to get the part rechromed, along with the Citroen badge.

The thing that I can’t get my head around, are the ‘bent’ coach bolts for the bumpers. My bolts were in very bad condition. I’ve managed to get stainless equivalents, but no I need to bend the heads. What a headache. Any ideas?
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.