Door card removal/ installation

Traction Owner’s Club › Forums › Technical › Bodywork & interior › Door card removal/ installation

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 19th November 2025 at 3:23 pm #37649
    Jacek Maklakiewicz
    Participant

      Hello fellow enthusiasts I’ve got to replace the door cards and would greatly appreciate any advice/ knowledge. I suspect the doors themselves will also require attention. The door pins are well and truly seized, maybe or not they get removed. What is the technique to remove the door handle and window winding handle …… many thanks

      20th November 2025 at 9:31 am #37657
      Bernie
      Participant

        To remove the handles, push the spring-loaded escutcheon into the panel to reveal a pin through the boss of the handle.

        Drive the pin out with a suitable punch and the handle w be free to come off the spindle but may require some persuasion if it has not been removed for some time.

        22nd November 2025 at 3:20 pm #37665
        Bernie
        Participant

          If there is not already a strong polythene (or similar) sheet attached to the door behind thd card, covering all the gaps between the door’s metalwork, you should add one.  It will help to prevent water damage to the door card.

          B….

          25th November 2025 at 7:25 am #37667
          Jacek Maklakiewicz
          Participant

            …… many thanks Bernie

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.