Steering Wheel removal

Traction Owner’s Club › Forums › Forum Archive › Traction Owners Club Forum › Help Wanted › Steering Wheel removal

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 3rd October 2014 at 6:13 pm #4257
    Anonymous

      And the complete shaft.

      I just try pulley the steering wheel base with a puller but it just bent so I am thinking it is rock solid on the shaft. I have already removed the steering box (and all other components) so just left with the steering shaft with the worm drive on the bottom end (with the square 4 bolt flange – stopping it going upwards) and the steering wheel base (stopping it going downward).

      Any suggestions on which is easier to remove. Are the steering wheel bases easy to get hold of as I might just angle grind it off.

      Thanks

      Ian

      3rd October 2014 at 6:32 pm #5476
      Anonymous

        What do you mean by the steering wheel base?

        3rd October 2014 at 6:37 pm #5477
        Anonymous

          Forgot the word for it. The part that the steering wheel bolts on to (three bolts) and then that then goes onto the steering shaft spline (hub??)

          It has a key slot in it so assume I can just pull it off but with my normal 3 armed puller is just bent the flange up.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • The forum ‘Help Wanted’ is closed to new topics and replies.