Light 15 rocker shaft assembly

This topic is empty.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
9th December 2016 at 8:54 pm #4658
Anonymous
On removing the rocker shaft from the cylinder head I find that three of the support pillars have a spacer in the cut side of pillar and two do not have a spacer. Should all the support pillars have a spacer?
I realise the end pillar spacer locates in the keyway and my other spacers are in the centre and other end pillars.
10th December 2016 at 8:59 pm #7838
Anonymous
You must have a spacer; if not, the support can crack when you tighten the bolt. Use a thin flat washer under the split washer so you don’t score and possibly scrape bits off of the aluminium support.
10th December 2016 at 9:39 pm #7839
Anonymous
Many thanks, I thought there should be spacers under all 5 shaft supports
11th December 2016 at 7:41 pm #7840
Anonymous
You’re welcome. I had to learn it the hard way.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

The forum ‘Help Wanted’ is closed to new topics and replies.