Re: Re: TORSION BAR ADJUSTMENT

[Anonymous]

It’s easiest to take the whole thing out as I described. The nut will not move 420919 if there is weight on the suspension. The nut sits to the front of 420919, it is moved by the nut and is not threaded. Once you get it out, you’ll see what is needed. You’ll need a long drift (to reduce the chances of smacking something you don’t want to) and at least a 2 pound hammer to knock out the forward pin but it will go with some gentle persuasion. The threaded pin will probably not just drop out, but you can pry it out of the front holder without any harm. Likely everything is covered in years of crud and undercoating. That all had to be scraped off of my 11B to see the clips holding 420921 in place.