Fitting Carpet

Traction Owner’s Club › Forums › Technical › Bodywork & interior › Fitting Carpet

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 24th June 2018 at 7:45 pm #23230
    Paul Barnard
    Participant

      I am currently treating my 1950 BL to a new set of carpets. They all seem to fit, albeit with a little ‘fettling’ but I am stumped by the two small pieces (see pic) which I cannot find a home for. I found a picture on the CTA Sweden site which just describes them as ‘for under shelf’, but I cannot for the life of me see that I need any further carpet in that position.

       

      Anybody out there who has done this before?

      Cheers

       

      IMG_6796

      25th June 2018 at 8:10 pm #23248
      Larry Lewis
      Participant

        That piece of carpet goes alongside the windscreen on either side, over the top of the wind-lace.

        26th June 2018 at 10:27 am #23252
        Paul Barnard
        Participant

          Hi Larry. Thanks for your reply, but I still can’t see exactly what you mean. The new side section of carpet I have fitted runs up far enough to meet the section of trim that runs down the side of the screen so I don’t see a place for this piece. Don’t suppose you have a photo?

          Sorry to be so dumb….

          27th June 2018 at 7:02 pm #23265
          Larry Lewis
          Participant

            they can also go alongside the ends of the dashboard in the case of the later cars with the thick windscreen surround, but on a 1950 they would go just above this area. The picture shows my 11B

            CARPET 001

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.