Rear Bumper Irons

Traction Owner’s Club › Forums › Forum Archive › Traction Owners Club Forum › Help Wanted › Rear Bumper Irons

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 7th March 2016 at 10:40 am #4565
    Anonymous

      Good Afternoon

      Could someone possibly post a picture of how and where the rear bumper Irons are attached.
      My small boot floor has been replaced and the holes for the bolts are below the floor and touching it.
      There is no room for the bolt, the hex has been completely cut away.
      Is the floor to low or should the bolts be inside the boot ?

      Dave

      7th March 2016 at 6:59 pm #7429
      Anonymous

        Hi Dave

        I have attached a picture/file of my rear bumper bars, this may help

        Nigel

        [attachment=0:1xcqi9sj]DSC02434a.jpg[/attachment:1xcqi9sj]

        7th March 2016 at 7:55 pm #7430
        Anonymous

          Thank you will have a look in the morning.

          7th March 2016 at 8:31 pm #7431
          Anonymous

            This is a picture before mine was removed and bodywork repaired, there is just enough room for the nuts and washers[attachment=0:4euy14xq]Bumper mount.png[/attachment:4euy14xq]

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • The forum ‘Help Wanted’ is closed to new topics and replies.