Oil Bath Air Filter Revisited

Traction Owner’s Club › Forums › Forum Archive › Traction Owners Club Forum › Help Wanted › Oil Bath Air Filter Revisited

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • 21st January 2018 at 5:08 pm #22077
    Roger Grix
    Participant

      I tried the forum a while back without success.  Not a single reply. I have now managed to obtain the two rubber mouldings for the carb and the filter ends but need the bellows to go in between. 7omm ID on both ends with a free length of about 90mm. I have found something I think would be suitable in Germany for a cost of 22,30 € (plus tax and shipping).  Unfortunately they have a minimum order value of 50 € plus shipping to UK (up to 5kg) of 18,20 € (plus tax) making a total in the order of 85 € which is starting to get a bit pricey.  There are plenty of bellows for sale as car spares but no dimensions given.

      So:  Does anybody know where to buy a suitable replacement?

      or:  Has anyone got a car of any make with a bellows meeting this spec?

      or:  Is anyone interested in buying one (or several 🙂 )with me, sharing shipping and taking the order close to or over 50 €?

      I have contacted a UK manufacturer that supplies the automotive industry to see if they can point me to a suitable vehicle part.

      Any other suggestions?

       

       

       

       

      21st January 2018 at 6:01 pm #22078
      David Faulkner
      Participant

        Problem with the forum Roger is lack of regular users which probably explains the lack of response.

        Those of us with Solex PCIB 32 / 34 carbs have the filter dropped straight onto the carb itself so lack of understanding of the issue will also apply. Have you tried John Gillard to see if he has any used bits that may meet what your after or can suggest an alternative?

        Hope you get your issued sorted though.

        21st January 2018 at 6:04 pm #22079
        Roger Grix
        Participant

          Thanks David,

          I will give John a ring.  Not sure why I did not do that already.

          It is just frustrating when you know that it will be out there somewhere – you just have to find it.

          Regards,

          Roger

          21st January 2018 at 6:16 pm #22080
          Roger Grix
          Participant

            For those who may not know, this is what it should look like.Oil Bath Air filter

            30th January 2018 at 11:42 pm #22159
            Roger Grix
            Participant

              An update.
              As two would be the same price as one, I decided to order two from Germany. Unfortunately that only makes 44,60 € and you cannot proceed to checkout with less that 50€ in your basket. I have since determined that only companies can buy on line and that individuals must order by email and the minimum order value is then 75 €, which means buying four.

              This is a link to the web page detailing the bellows:

              https://shop.dynatect.com/bellows/moulded-bellows/moulded-bellows-103538.html

              If anyone has any comments on suitability or is interested in buying, please let me know.
              Roger

              31st January 2018 at 10:56 am #22165
              David Faulkner
              Participant

                Roger on the Steinbock site which has the same part  https://www.steinbock-industrie.de/en/products/bellows-taylor-made/vulcaflex-moulded-bellows/bellows-shop/600/moulded-bellows-f-1128-r-nbr  at the top it says ‘No Minimum Value’ so worth checking with them?

                31st January 2018 at 10:17 pm #22168
                Roger Grix
                Participant

                  Thanks a million, David.
                  I have been to their site and it looks good. Unfortunately, they are awaiting stock. I have registered for notification when stocks arrive (they say 2-3 weeks).

                  I will keep on top of this.
                  Thanks again.

                  31st January 2018 at 10:37 pm #22169
                  Roger Grix
                  Participant

                    I have just googled the bellows number and it pops up in several places. Mostly in Germany but also in France – see this link.

                    https://www.ventouses-soufflets.com/fr/soufflets-ronds-d-61mm-a-d-100mm/172-1148-nbr-soufflet-nbr-d70mm-lmin-20mm-lmax-160mm.html

                    Prices all over the place and all seem to be awaiting stock. I will have a really good look through the possibilities tomorrow.
                    thanks again.

                    6th February 2018 at 11:18 pm #22214
                    Roger Grix
                    Participant

                      Just to let you know, the French supplier had stock, no minimum order, reasonable postage, so I ordered one asking for it to be sent ASAP.  I got a call from Lyon the next morning from a long term English expat who put it in the post straight away, without waiting for the transfer to arrive.  I do love it when there is still some trust in the world.

                      Anyway, it should arrive this week so I will feed back to the forum.

                      I did contact John Gillard but he is in the same boat with filters but no bellows.

                      I have also been chatting to John Moon, the Slough Champion, so look out for the next Floating Power.

                      7th February 2018 at 9:07 am #22216
                      David Faulkner
                      Participant

                        Just to let you know, the French supplier had stock, no minimum order, reasonable postage

                        Good news Roger, finding a part number really helps with Google searches for those hard to find bits.

                      • Author
                        Posts
                      Viewing 10 posts - 1 through 10 (of 10 total)
                      • The forum ‘Help Wanted’ is closed to new topics and replies.