Re: Re: 1955 Traction 11B “Barn Find” Project

I think I have finally finished all the really dirty jobs. I raised the car up on axle stands so I could get underneath and get all the crap off the bottom of the floor pan. Also so I could finish off the welding on the replacement front floor panel.

Lots of dust but now I can clean the garage and hopefully it will stay a little more dust free 😕

[attachment=2:c9chwh0u]P1060971.jpg[/attachment:c9chwh0u]

I slapped a load of rust converter paint (Restom) on the panels and left it to dry.

[attachment=1:c9chwh0u]P1060982.jpeg[/attachment:c9chwh0u]

I joined the V sections under the floor. They were slightly off but managed to create a small filler panel. Welded it all up and covered all the seams with a polyurethane seam sealant.

Inside I rust protected, primered and painted the inner floor that is covered with the seat cross member. I also seam sealed the welds and edges before putting the cross member back on.

[attachment=0:c9chwh0u]P1060974.jpeg[/attachment:c9chwh0u]