Re: Re: 1955 Traction 11B “Barn Find” Project

[Anonymous]

I have put on the cooling fan and just placed the radiator to make sure everything fits OK. I also installed the water temperature sensor into the top hose and routed the cable.

[attachment=1:2lit8oea]P1070387.jpeg[/attachment:2lit8oea]

Put on the heater tube, again just to make sure it fits. I will take it off again when I start trying to turn the engine over.

[attachment=2:2lit8oea]P1070388.jpeg[/attachment:2lit8oea]

I filled the gearbox up with oil and fitted the sump plug to the engine sump (if not I knew I would forget later 😕 ) And lastly I have put on the second long pipe of the exhaust. Again it is a little bent and dented form the previous owner but I intend to replace the exhaust in about a year or so (for stainless)

[attachment=0:2lit8oea]P1070390.jpeg[/attachment:2lit8oea]