Re: Re: Wiper Motor Gearing Problem

[Anonymous]

Hi Peter
Thanks for your much appreciated and helpful posts. I have tried to remove wiper motor by removing blinker dash switch to remove r/hand screw but can not get access to the opposite screw to remove motor through battery box opening.
I can get wipers working perfectly by putting a cable tie around motor to draw gear to base plate, but would this not stop motor from disengaging and stop the black knob turning wipers under windshield to open same.
When pulling Wiper switch (EG) out Wiper motor starts up but not in gear until you pull motor forward to base plate then wipers work and park perfectly until switch is pushed back to off.
Regards
Davy